Tips to prevent electrical damage

1. Install overvoltage protectors

The overvoltage protectors are devices designed to protect electrical appliances against voltage increases, which can occur during electrical storms or through network failures. These devices absorb excess electricity and prevent it from reaching your devices, prolonging its useful life. It is especially useful to install them in areas where sensitive devices such as computers or television are connected.

2. Review and keep the electrical installation in good condition

This is one of the most important points to prevent electrical damage. Conduct regular reviews of the electrical installation is essential to detect possible failures, such as worn cables or loose connections, which can be dangerous. Contracting a certified electrician to evaluate the electrical installation can help identify problems before they become risks. Unfortunately, this is something that is not often done until there are real problems.

3. Avoid overloading the plugs

Connecting too many devices to a single plug or regatta can cause overload and overheating. It uses overload protection crates and distributes devices between different plugs to prevent high-consumption points from being generated.

4. Avoid the use of electrical equipment in wet environments

Electricity and water don't get along. Avoid using electrical appliances in wet or wet areas, such as bathrooms or kitchens, without taking precautions. Install plugs with additional protection in these areas, such as differential switches, helps prevent accidents.

An eye with a dryer, we use to plug in just to get out of the shower and sometimes when the bathroom is too damp. Preventing electrical damage in these cases is something we are often forgotten.

5. Disconnect devices during electric storms

If there is an intense electric storm, it is recommended disconnect sensitive devices like computers, TVs or large appliances. This is certainly a way to prevent electrical damage, as it reduces the risk that a surge of radiation-damaged tension affects your devices.

6. Install smoke and heat detectors

The smoke and heat detectors are useful for detecting overheating or fires caused by electrical problems. Install them near areas where there are many appliances can give an early sign of problems and avoid major damage.

7. Avoid permanent lengthening cables

Using temporary lengthening cables is safe, but leaving them permanently connected can overheat them and cause electrical failures. If you need more plugs, the best thing is to install additional electricity points safely.

8. Keep appliances and cables clean and unobstructed

The accumulation of dust in electrical appliances and cables can cause overheating. Keep the appliances clean and make sure their cables are not crushed or damaged, especially in areas where more waste is generated such as the kitchen.

In the case of very old appliances, a regular review should be made and be changed, as far as possible, to new and more efficient ones.

9. Install a suitable ground system

The Grounding system is key to preventing electrical damage and protecting against electrical shocks and short circuits. Make sure your home has a suitable ground installation, which redirects any excessive current to the ground rather than the electric circuit, which protects both people and equipment.

10. Check the state of the plugs and current sockets

The waste current or loose can be a source of electrical problems. If you notice signs of damage, like sparks, strange noises or heat in a plug, contact a professional to make a repair.

These tips will help protect your home from electrical damage and ensure the proper functioning of your electrical installation and devices. Remember that prevent electrical damage It's always the best defense.